برق، الکترونیک، الکتروتکنیک، مکاترونیک، پزشکی، کشاورزی

برق، الکترونیک، الکتروتکنیک، مکاترونیک، پزشکی، کشاورزی و

برق، الکترونیک، الکتروتکنیک، مکاترونیک، پزشکی، کشاورزی

برق، الکترونیک، الکتروتکنیک، مکاترونیک، پزشکی، کشاورزی و

داده هایی در مورد برق، الکترونیک، الکتروتکنیک، مکاترونیک، پزشکی، کشاورزی و

تبلیغات
آخرین نظرات

۱ مطلب با کلمه‌ی کلیدی «Gigabyte» ثبت شده است

بوق مادربرد های گیگا بایت

ShahBaz | دوشنبه, ۷ فروردين ۱۳۹۶، ۰۸:۱۸ ب.ظ

Gigabyte is using Award BIOS/UEFI

When CPU is dead then is no sound at all ( on diagnostic display is or 00 or it's not working at all ). When CPU is fine then board is always making some beeps and Robert17 already made a list of codes.

What does BIOS beep sound mean?

1.AWARD BIOS:

1 short beep :System normal

2 short beep :CMOS Error

1 long beep and 1 short beep:Memory error

1 long beep and 2 short beep:Graphic card error

1 long beep and 3 short beep :AGP error

1 long beep and 9 short beep :Memory Error Continuous long beep :Memory not correctly installed Continuous short beep :Power supply unit failed

2.AMI BIOS:

1 short beep :Memory Error

2 short beep:Memory parity check error.

3 short beep :basic memory 64K address check error

4 short beep :Real Time Clock malfunction.

5 short beep :CPU error 6 short beep:Keyboard error

7 short beep :CPU interruption error 8 short beep:Graphic card error

9 short beep :Memory error

10 short beep :CMOS error

11 short beep :CPU cache memory malfunction


AMI BIOS FATAL ERROR BEEP CODES

1 beep –  Refresh failure.-  (DRAM-Memory Error)
2 beeps – Parity error. - (Memory parity check error-circuit failure)
3 beeps – Base 64 K memory failure. - (Basic memory 64K address check error)
4 beeps – Timer not operational. - (Real Time Clock=System timer failure)
5 beeps – Processor error.
6 beeps – 8042 – Keyboard controller gate A20 failure.
7 beeps – Processor exception interrupt error. - (Virtual mode exception error)
8 beeps – Display (Graphic card) memory read/write test failure.
9 beeps – ROM checksum error.
10 beeps – CMOS shutdown register read/write error.
11 beeps – CPU Cache memory bad. - (malfunction-error - The L2 cache is faulty)

Continuous long beep  :Memory not correctly installed - Memory bank is broken or not plugged well
Continuous short beep :Power supply unit failed


  • ShahBaz